Share your PSU data/status on “FEED” with friends and check your own messages from your friends. Also, you can find Thermaltake official news releases and product information on the “FEED” page.

Click on “ME”, users can monitor the status of PSU/VGA/CPU (data will be uploaded per minute), including efficiency, fan speed, voltage, current, etc. Zoom in to see more details of the graph, there is no limit on the number of PSUs being monitored at any one time.*

Click “Analysis”, users can choose the specific PSU they want to monitor, or click “Select All” to see all the digital power supplies. Detailed information such as total time, total cost, and KWh can be monitored at once. Besides line chart, users can also see the data in pie chart and bar chart.

Our real-time warning alert will be pushed to DPS G Smart Power Management Cloud 1.0 immediately once the fan fails, PSU temperature is overheated (over 140℉/60℃), or voltage (over/under 5% of normal level) operate abnormally.

Aside from the silent and performance mode, DPS G PC APP 2.0 comes with the new Zero Fan mode to minimize the audible noise of your PC. The fan will be turned on around 20% of rated load to optimize the thermal performance and minimize the audible noise.

DPS G PC App 2.0 enables users to digitally monitor the key parameters of the CPU and VGA, including efficiency, wattage, voltage and temperature while using computer.*

DPS G PC APP 2.0 offers real-time warning alert when the fan speed, temperature (over 140℉/60℃), and voltage (over/under 5% of normal level) operate abnormally.

Users are capable of monitoring single or multiple PSUs anytime anywhere while using DPS G Mobile APP 1.0.

Click “Single Comparison”, you can freely choose which PSU you want to monitor in detail such as efficiency, fan speed, voltage, current and so on, or use “Select All” to see all the data of digital power supplies. After you select the data, the DPS G Mobile APP 1.0 shows how data change during a period of time.
DPS G Mobile APP 1.0 is available on OS and Android devices:

Users are capable of monitoring single or multiple PSUs while using DPS G Mobile APP 1.0.

Click “Total Analysis”, users can see the selected information of the PSU, including Total Time, Total Cost, and KWh. Percentages of each item will be showed clearly, either in line chart or pie chart.

Our real-time warning alert will be pushed to your mobile devices immediately once the fan fails, PSU temperature is overheated (over 140℉/60℃), or voltage (over/under 5% of normal level) operate abnormally.