Thermaltake Water 3.0 Riing RGB 280
Designed to exceed enthusiast’s expectations, the Thermaltake Water 3.0 Riing RGB 280 comes with dual 140mm high-static pressure patented LED fans with a large surface radiator, high performance waterblock and pump for ultimate CPU cooling. The built-in Riing fan adopted PWM fan, compression blades and hydraulic bearings that guarantee superior cooling performance and quiet operation. One simple upgrade allows users to enjoy better cooling performance and greater CPU protection!
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
Riing 14 LED RGB Colors Radiator Fan
Featuring high-static pressure design, exceptional cooling performance and
ultra-silent operation, the patented circular multicolored 140mm RGB fan utilized PWM fan, concentrated
compression blade, hydraulic bearings, wind blocker frame and anti-vibration mounting system. Moreover, the
built-in LED ring can maintain color and brightness uniformity. The lighting is visible from all sides and
angles.
China Patent application : CN204498539U
US Patent application : 14/702,806
Smart Fan Controller
A self-contained fan controller can switch between 5 LED modes including solid colors of red, blue, white, green or disable and cycle through 256 colors. Play/Pause functions allow users to cycle colors (color remains unchanged even after the PC has been turned off or rebooted) with speed control options reduce noise even more all from your fingertips.
High Efficiency Radiator
Special designed 280mm large surface radiator not only doubles the cooling surface, but also supports up to 4 x 140mm fans for additional heat dissipation.
High Performance Waterblock and Durable Sleeved Cable
The high performance copper base plate accelerates the heat conductivity. The pre-refilled coolant reduces any stress from liquid replenishment hassle. Additionally, the reinforced sleeved cable delivers the best durability and prevents the tubing from any damages.
High Reliability Pump
The high quality and reliable pump enables the maximum amount of water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore no refill is either needed or required.
Simple Setup
Featuring the latest cooling performance, the self-contained design of the Thermaltake Water 3.0 Riing RGB Series provides an easy installation system and a totally maintenance-free operation, requiring only the minimum amount of space in the chassis.
Cautions
Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks:
- To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
- It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while protecting the entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse, and dry. This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your water loop setup:
- It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while preventing corrosion in the entire cooling system (copper, brass, nickel, aluminum, and steel).
- Fill the reservoir with coolant and cycle the power on and off several times while the pump pushes the coolant into the loop.
- DO NOT let the pump run dry. If no liquid is entering the pump, turn off your power immediately.
- Fill the reservoir to the top to prevent air from entering the pump.
- If necessary, tilt the system slightly from side to side to bleed the air out of the loop.
- Place paper towels under fittings and joining points to test for leaks.
- Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
- Before starting, flush out your system properly to prevent any coolant or unwanted particles from sticking to your tubes, radiators, and other cooling components.
- Coolant might fade over time.
| P/N | CL-W138-PL14SW-A |
|---|---|
| 중량 |
1181g |
| Pump |
Rated Voltage : 12 V Rated Current : 175 mA |
| Water Block | Material : Copper |
| Fan |
Dimension : 140 x 140 x 25 mm Speed : 800 ~ 1500 R.P.M (PWM) 400 ~ 1000 R.P.M (Low Noise Mode) Noise Level : 18.5 ~ 26.4 dB-A Rated Voltage : 12 V Max. Air Flow : 22.14 ~ 40.6 CFM Max. Pressure : 0.57 ~ 2.01 mm-H2O Connector : 5 pin |
| Tube |
Length : 326 mm Material : Braided Tube |
| Radiator | Dimension : 313 x 139 x 27 mm |
| Compatibility |
Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/1150 AMD TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2 *AIO Cooler bracket adapter comes in the AMD Threadripper CPU box. |
User Manual
- File Name
- 상세 설명
- Size
- Version
- Release Date
-
Manual
- Multi-language
- 8.5 MB
- 2016-12-27
